修复你的物品 社区 商店

Oculus Quest 2 是 2019 年 5 月 21 日发布的 Oculus Quest 的继任者。Quest 2 是一款经过改进的型号，具有更好的处理器和重新设计的触摸控制器。

171 个问题 查看全部

更多选项

My X button wont work any more after using too much contact cleaner

This happened a couple weeks back when I noticed my joystick had drift, naturally I grabbed my WD-40 Contact cleaner, took the battery out and sprayed a lot on there, then I used my air duster to dry it called it a day, put the battery back in and loaded up blade and sorcery but I noticed my x button didn't work however the capacitive touch center still worked for it. I replaced the battery and let it dry for a bit but still it wont work.

回答此问题 我也有这个问题

这是一个好问题吗？

是 否
得分 1
添加一条评论

2个答案

筛选条件:
最有帮助的 最新 最老的

更多选项

WD-40 is just mineral oil. The oil probably is lubricating the membrane and switch so much that it cannot read a press. To fix this I would recommend using 90% or higher isopropyl alcohol to clean away the oils. Be sure to not use WD-40 on electronics, as it is meant to lubricate and protect metal parts.

这个答案有帮助吗？

是 否
得分 0

1条评论:

The original poster said they used WD-40 Contact Cleaner, which is specifically used for electrical components.

由完成的

添加一条评论

更多选项

Same. I have used WD-40 specialist contact cleaner for all my oculus controllers whenever I have a drift problem. For some of my games I use the cleaner spray every single day. WORKS WONDERS. I have however had two single controllers break directly after using the spray. One, the joystick just popped right out of a side and was disconnected from the controller! And the other incident was the A button stopped working, for good. Like you I have been unable to repair it.

*The other commenter thinks you are using actual WD-40 and not the one fore electrical parts.

这个答案有帮助吗？

是 否
得分 0
添加一条评论

添加你的答案

oisin 将永远感激不已
浏览统计数据:

过去 24 小时： 2

过去 7 天： 20

过去 30 天： 73

总计 782