修复你的物品 社区 商店

Repair guides and support for all-in-one washer and dryer assemblies as well as stacked units.

140 个问题 查看全部

更多选项

Kenmore washer combo stuck in end cycle

I have a kenmore washer and gas dryer combo that's stuck in the end cycle. My wife put some clothes in the washer, accidentally started it on casual, turned the knob to normal, and pressed it again. The lid locked and then it just went into the end cycle where it drains and does a light spin.

I haven't been able to get it to stop. I press the knob and it just beeps 2 fast beeps and then one solo beep right after. The lid stays locked as well. I've unplugged it overnight and that didn't work. I checked the circuit board and nothing is out of place.

What could be causing this and how the heck do I fix it?

回答此问题 我也有这个问题

这是一个好问题吗？

是 否
得分 0
2条评论

Hi,

What is the model number of the combo unit?

由完成的

The number inside of the dryer door is 417-71722510. I still can't get the lid for the washer to unlock. I checked the pump for obstructions and everything. I'm at a loss.

由完成的

添加一条评论

1个答案

筛选条件:
最有帮助的 最新 最老的
最有帮助的答案

更多选项

Hi,

The 2:1 (E21?) beep error code you mentioned doesn't seem to be listed in the service manual for the model series. Not sure if this will work but try getting into the diagnostic mode and clear all the error codes, by pressing and hold the cycle selector knob for 5 seconds and then running the diagnostics again and see what you get

这个答案有帮助吗？

是 否
得分 1

1条评论:

I pulled the water pump to test the rotor and it will only turn a quarter turn before it stops and bounces back. It appears that the pump is most likely the culprit. The downside is, sears stopped carrying the part in their parts direct warehouse. I had to scoure the internet for a replacement. The part might be in tomorrow or Saturday. Time will tell if this is actually the solution.

由完成的

添加一条评论

添加你的答案

mashashin 将永远感激不已
浏览统计数据:

过去 24 小时： 1

过去 7 天： 4

过去 30 天： 6

总计 163