跳转到主内容

这款4.7英寸iPhone于2014年9月19日发布,是iPhone 6 Plus的缩小版。

4994 个问题 查看全部

iPhone 6 Dying at 4% after battery replacement!

I have an iPhone 6 and it randomly started to bootloop.I knew it was a battery issue, So I went into battery health and it was just loading.So I went to the same place I got my phone battery replace and they replaced it again.Everything was going great until my iPhone was at 4% and it randomly died.I plugged it in but instead of showing the low battery logo it showed the apple logo and it was at 4% instead of 1%.What should I do?

回答此问题 我也有这个问题

这是一个好问题吗?

得分 0
1条评论

Have You calibrated the battery?

完成的

添加一条评论

1个答案

最有帮助的答案

Try calibrating the battery

Run it down until it shuts off,
Then charge it up to 100% uninterrupted then keep it plugged in for 2 more hours,
Run it down till it shuts down,
And finally, charge it uninterrupted to 100%

这个答案有帮助吗?

得分 1

7条评论:

I was going to mention calibrating the battery as above but I’d run it down to 10% and then charge again rather than letting it die. But do what @beanman56 says.

完成的

@strongbow - It’s very necessary for the calibration to be done completely as it’s said,

Otherwise it’s probably gonna be the same

完成的

To be honest, they don't need calibrated at all. Calibration was for the old nickel based batteries. The newer lithium based batteries don't need calibrated. They are basically plug and play. I wouldn't worry about dying at 4%, it should work itself out over a few charges.

完成的

@strongbow - Then explain why ifixit says to calibrate the battery

完成的

Ask them? I’m not trying to explain someone else’s mistakes.

https://discussions.apple.com/thread/789...

完成的

显示更多的2条评论

添加一条评论

添加你的答案

Keshawn Vasugan 将永远感激不已
浏览统计数据:

过去 24 小时: 0

过去 7 天: 1

过去 30 天: 2

总计 82