Broke maybe a capacitor off the logic board

Question

MacBook Pro 15" Touch Bar 2017

模具型号A1707。于2017年6月上市，这台MacBook Pro的特征为配有Kaby Lake处理器，可升级至2.9GHz、可动态超频至3.9GHz四核英特尔酷睿i7处理器。

327 个问题查看全部

Nicola Amadei @nicolaamadei

声誉积分: 23

2

发帖于: 2022年8月3日

更多选项

Broke maybe a capacitor off the logic board

Hey guys, while opening the lower case of my MacBook Pro 15 2017 TouchBar, I've possibly broke this component from the right side of the board (basically below the TouchID side of the mac).

It didn't fully detach, but it did bend and I am not sure wether the electrical connection is damaged. I managed to straighten it back in place and I added a small drop of superglue on the side to reinforce it so it doesn't bend again.

The Mac is all fine, Thunderbolts work and can't see any major problem, I am just worried it could be a critical component and may show problems in the future.

Other than cleaning those dirty fans, should I worry about this unknown component?

已回答！ 显示答案我也有这个问题

这是一个好问题吗？

是否

得分 1

添加一条评论

2个答案

已选择的解决方案

Dan @danj

声誉积分: 480.2千

Self employed contract worker

35

329

971

发帖于: 2022年8月3日

更多选项

That is a stand off, it's to protect the pressure from the the bottom cover from pressing on the shielded area. You'll also find one between the fans as well.

这个答案有帮助吗？

是否

得分 2

3条评论:

I’ve seen a few metal standoffs looking like protruding needles around the board, but this is much thicker and has a rubbery cover, it’s soldered to the board very much like a cylindrical capacitor, that’s why I worry more

由 Nicola Amadei 完成的 2022年8月3日

@Nicola Amadei - The pogo pins are mostly used in the assembly process of the board these few bumpers where added later during the Q/A process as it was observed the gap was a bit tight.

由 Dan 完成的 2022年8月3日

Amazing, thanks, I won’t worry then if it’s even slightly damaged

由 Nicola Amadei 完成的 2022年8月4日

添加一条评论

I’ve seen a few metal standoffs looking like protruding needles around the board, but this is much thicker and has a rubbery cover, it’s soldered to the board very much like a cylindrical capacitor, that’s why I worry more — Nicola Amadei
@Nicola Amadei - The pogo pins are mostly used in the assembly process of the board these few bumpers where added later during the Q/A process as it was observed the gap was a bit tight. — Dan
Amazing, thanks, I won’t worry then if it’s even slightly damaged — Nicola Amadei

HelloMacOS @hellomacos 声誉积分: 25.9千 205 22 38 · Answer 1 · 2022-08-03T08:15:29-07:00

最有帮助的答案

HelloMacOS @hellomacos

声誉积分: 25.9千

205

22

38

发帖于: 2022年8月3日

更多选项

Hi

If you can give me some close up photos of the component I can see if it’s good or not

As for the component if you can find a code that looks something like this 820-xxxx-xxxx(x means random numbers)on the board I can find out what it does and if it’s important

Hopefully this helps

Thanks:-)

这个答案有帮助吗？

是否

得分 2

2条评论:

Hey, I couldn’t notice any ID around it, but now I’m also very wary of trying to reopen the bottom case (at least until the next fan clean)

The component itself doesn’t look broken, it’s maybe more it’s soldering to the board that could be damaged :)

由 Nicola Amadei 完成的 2022年8月3日

@Nicola Amadei

The code is probably on the other side

If you can tell me the specs I can find it online for you:-)

Eg

Processor

Ram

Storage

Serial number

由 HelloMacOS 完成的 2022年8月3日

添加一条评论

MacBook Pro 15" Touch Bar 2017

Broke maybe a capacitor off the logic board

2个答案

添加你的答案