跳转到主内容

The Macintosh Color Classic was the color all-in-one Mac in the early 1990's

10 个问题 查看全部

My Macintosh Color Classic turns on by just switching the power button

Hi,

I was wondering if anyone of you had a similar issue as mine. Please let me explain what happened to my system (FYI I was following Branchus Creations’ video in Youtube as a reference).

I have a Macintosh Color Classic which was totally dead when I obtained it thus it has been recapped (At this point, all capacitors on the logic board were replaced including some of the core capacitors of the analog board which were located at the center).

It was then working for a while but suddenly the screen blacked out. So I have then replaced the 330uF/400V capacitor on the analog board and again, it was working fine for a while.

Unfortunately, it blacked out again so I have recapped every single capacitor on the analog board but so far I was never able to resolve the black screen issue.

It was then when the Color Classic started to behave strangely. As you know, the Color Classic is supposed to start when you press on the start key on a Macintosh keyboard but in my case it will power up right after I have turned on the power switch on the rear side. Beside of this behavior, I am also hearing a continuous ‘clicking‘ sound all the way (and there is no screen).

I hear the hard drive spinning but don’t think it is booting the OS.

If someone please could share some light on this matter I would be really grateful.

Kind regards

Old PC guy

已回答! 显示答案 我也有这个问题

这是一个好问题吗?

得分 0
添加一条评论

1个答案

已选择的解决方案

The clicking sound is the flyback transformer which has failed on the analog board See if this help you out The in's and out's of the Color Classic

这个答案有帮助吗?

得分 2

1条评论:

Hi Dan,

Thank you so much for your reply. I will check the manual to see if I can make the most out of it.

Kind regards

Old PC guy

完成的

添加一条评论

添加你的答案

George Fujita 将永远感激不已
浏览统计数据:

过去 24 小时: 1

过去 7 天: 8

过去 30 天: 26

总计 385