声誉积分: 25.8千
205
20
38
I have a very minor case of water damage on a MacBook Pro A1989 it also has no burned components but has capacitors and resistors missing from previous repair attempts does by a different shop any ideas/advice on this MacBook as I’ve never worked on a device the new before only the oldish mbps and airs
Any advice would be greatly appreciated
Thanks:)
声誉积分: 9.5千
33
18
65
First try to reflow the solder on the port.
这个答案有帮助吗？
Thanks for the answer it really helps but the ports on this MacBook are the ones that are on a flex cable:)
Thanks again
过去 24 小时： 0
过去 7 天： 2
过去 30 天： 9
总计 409
11条评论
Thanks for the reply it is greatly appreciated:)
由 HelloMacOS 完成的
@hellomacos did you find the problem
由 daniel 完成的
@tech_ni
Hi
I kind of found the problem
There are components missing on the board
But the video that you recommended pointed me towards the CD3215 chips but I didn’t really know how to test them
由 HelloMacOS 完成的
do you need brd and schematics ?
由 daniel 完成的
I think I have them but I don’t have a reader that can read them so I have no way no f confirming that
由 HelloMacOS 完成的
显示更多的6条评论