In the screen replacement video https://www.youtube.com/watch?v=jtl4KKRI... it shows that there are 4 screws that connect the front facing sensor assembly to the screen. This has to be paired to the new screen, but I was wondering why the pictures on the replacement iPhone 11 screen iPhone 11 Screen on the ifixit product page did not have these 4 screw holes.
声誉积分: 139
5
One of the screws is tiny and located in the top left (facing the back of the panel In the sensor aray.
It holds the right angled cover for the chip behind the proximity mic grill thingy. Sandwiched between the screen chip and this bracket is a slide on auxiliary plate to retain the long square chip.
The screw in question is a y000 and is about 1.2 mm long.
Either the screw or auxiliary plate can be lost and not effect the functions of the phone if one or the other is lost during repair. Even though it's unprofessional and improper to leave out plates fasteners etc. It will get the job done.
Some aftermarket parts don't bother with some dedunant screws sometimes but those are typically parts you'd want to avoid as they obviously cut corners in manufacturing and could have faults down the line post repair.
这个答案有帮助吗？
过去 24 小时： 0
过去 7 天： 1
过去 30 天： 2
总计 33
