I have harmon kardon onyx 4 speaker, in fact I have two. One is not working, maybe battery issue. My question is, is there a way to bypass bluetooth in just make it a amplified wired (headphone) jack speaker. I m tired on it cutting out on bluetooth.
would just like to use it as wired computor speaker. Is there a way to do that.
Brad
声誉积分: 450.1千
11
367
1.4千
Hi,
Do you mean the Onyx Studio 4?
Connecting audio via the 3.5mm aux in jack, using a stereo audio cable, should cut off the BT.
If it doesn’t do this then perhaps you can disconnect the antenna from the motherboard so that it can’t receive any BT signals that are being transmitted unless the BT host device is right on top of the speaker. The downside with this is that it will also prevent any WiFi connection to the speaker as they use the same antenna.
Here’s an image taken from a Onyx Studio 4 teardown video which shows where the antenna is connected to the motherboard.
(click on image to enlarge)
这个答案有帮助吗？
过去 24 小时： 3
过去 7 天： 14
过去 30 天： 51
总计 2,058
1条评论
I have the same issue with Aux connection, sound mute and come back randomly.
When you using Aux connection, is the speaker power plugged in?
Do you have the same issue if just by its battery?
由 Yu Gao 完成的