Galaxy S10 not using full capacity of new battery.

Question

三星 Galaxy S10

71 个问题查看全部

Daniel Roosa @danielroosa

声誉积分: 1

发帖于: 2021年8月18日

更多选项

Galaxy S10 not using full capacity of new battery.

Hi,

I recently bought a new battery for my Galaxy S10 from Ifixit. The install went fine but the phone seems to believe the new battery is the same capacity as the old one. I’ve been looking at the charging info on the Accubattery app and its only putting 2900Mah of charge in the battery but it should be going to 3300Mah with the new battery. I followed the calibration instructions sent by Ifixit (Charge to 100% + 2 hours, fully discharge then charge fully) around 3 time now but still getting the same results. I even used the Samsung quick reset feature (Dial *#0228# and use Quick Start) but get no change in the battery capacity. Any help would be appreciated, I fell like I’ve been sent a used battery that someone else has returned.

Thanks

回答此问题我也有这个问题

这是一个好问题吗？

是否

得分 0

添加一条评论

1个答案

Innovatrix Repairs @innovatrix 声誉积分: 529 4 1 · Answer 1 · 2021-08-21T19:05:45-07:00

Innovatrix Repairs @innovatrix

声誉积分: 529

4

1

发帖于: 2021年8月21日

更多选项

I would reccomend to disregard the app, and peform a simple drain test. Let the battery fully charge + 30 min or so. Then simply put a youtube to play none stop in the background and take note every 15 min of the battery %.

Usually a 6% drop/hr is typical for a proper functioning battery.

If it’s much higher then there may be a manufacturers defect.

The reason I suggest to disregard the app is because there many variables that commes into account about the accuracy of that reading.

I hope this helps

这个答案有帮助吗？

是否

得分 0

添加一条评论

三星 Galaxy S10

Galaxy S10 not using full capacity of new battery.

1个答案

添加你的答案