声誉积分: 1
1
声誉积分: 11.4千
7
5
1
Just be aware that by replacing components tied to FaceID will result in the loss of FaceID. The components are programmed to each board with the use of a special tool only apple has. But you should be able to replace it nonetheless. You’ll get a message when the device turns on stating “apple is unable to activate FaceID”.
这个答案有帮助吗？
I understand that however I could not find any guide about ipad pro 11 or ipad pro 2018/2020 getting their face id flex cable ( the one attached to lcd) being replaced. only 1 video I could find on chinese video https://haokan.baidu.com/v?vid=123967644...
I wonder how that works because I didn't see any programmer being used here to reprogram new flex cable.
@imab I have absolutely no idea what they're talking about in that video. If they replaced the flex cable and maintained FaceID, then they must've transferred the components to the new cable.
@hootonberg ok I ordered that proximity sensor cable from aliexpress seller but when I attached to my ipad it started a bootloop. I had to remove it to make ipad restart. I do not know why it is not working.
@imab I would try another proximity sensor then. Sometimes people sell junk parts, especially on AliExpress and eBay. I know in the case of the iPhones if that assembly is shorted out it can cause a bootloop as you mentioned.
过去 24 小时： 0
过去 7 天： 9
过去 30 天： 28
总计 1,453
