My switch fell into a pool last month and damaged the screen. I finally opened it up and cleaned it with 99% alcohol and replaced the screen. Now the Home and Capture buttons don’t work, dpad down makes the volume go up, and L3 acts like the power button. Any ideas what’s happening or how to fix?
声誉积分: 73
3
1
1
This is not good news. Considering what you have just described, it’s safe to say that you should abandon the console but salvage things like buttons, the new screen, and the digitiser. Apart from that, the fact that the volume up is mapped to d-pad down means there is some shorting or interferance taking place. The volume is controlled and passd through the daughter board on the (when opened) right side of the board.
If you have the patience of a saint, I would recommend going over each of the faulty connections with a multimeter and seeing what happens. Anything that looks dark or otherwise “different“, is a sign you’ll need to replace.
The fact you can diagnose this is a sign this may be salvagable; the console can turn on.
这个答案有帮助吗？
声誉积分: 13
1
I had a very similar problem, where the down button on dpad would turn up the volume. Also the volume down button wouldnt work and the console would just turn itself on.
In my case the problem was the flexcable that connects the main and daughter board. I replaced it now it works fine.
这个答案有帮助吗？
过去 24 小时： 0
过去 7 天： 3
过去 30 天： 23
总计 494
