Error code 00008 in display - where to look for

No unfortunately. I had to send it back to the seller and they could not figure out…so they refunded me. I loved the bike so might buy another of I can find a seller that does service the bikes.

这个答案有帮助吗？

是否

得分 0

1条评论:

Well, I had two bikes and the second bike gave the same error an I solved it: Is is the engine disconnected error.

What happened is that the steer and frontwheel were turned backwards and that put stress on the engine connector, and it csme loose. It is located inside the left stem of the fork, you can see it if you look from the right side in.

I had to remove a little clamp and was able to rejoin the connectors and the error dissapreared. In stead of putting the clamp back, I used two tiewraps to fix the cable on the stem so I can easily remove the tiewraps and reach it when I am not at home.

由 Frans Dijkstra 完成的 2022年7月27日

添加一条评论

Well, I had two bikes and the second bike gave the same error an I solved it: Is is the engine disconnected error.

What happened is that the steer and frontwheel were turned backwards and that put stress on the engine connector, and it csme loose. It is located inside the left stem of the fork, you can see it if you look from the right side in.

I had to remove a little clamp and was able to rejoin the connectors and the error dissapreared. In stead of putting the clamp back, I used two tiewraps to fix the cable on the stem so I can easily remove the tiewraps and reach it when I am not at home. — Frans Dijkstra