Stopped on 'rinse' with buzzing sound, why

Question

洗烘一体机

提供洗烘一体机以及叠放式机型的维修指南以及支持。

20 个问题查看全部 | 290配件购买

zinna b @zinniab

声誉积分: 11

1

发帖于: 2020年12月24日

更多选项

Stopped on 'rinse' with buzzing sound, why

kenmore 417.98702891 youtube suggested it was the coupler, but i can’t even find it. I pulled out the motor, but didn’t see it or any sign of it.

machine is 20 years old. I was running a small load, drum was filled to small level. I took all items out, let it sit for a long time, still didn’t run.

I can’t afford to replace it, can’t even really afford to fix it, certainly can’t afford to pay someone to come out and not be able to fix it…

the dial is directly pointing to rinse.

washer pump

已回答！ 显示答案我也有这个问题

这是一个好问题吗？

是否

得分 0

添加一条评论

1个答案

已选择的解决方案

jayeff @jayeff

声誉积分: 528.6千

11

401

1.5千

发帖于: 2020年12月25日

更多选项

Hi @zinniab ,

Just verifying that the washer fills OK, agitates OK but when it comes to the rinse part of the cycle that it doesn’t drain but just buzzes, is this correct?

If so it sounds like there may be a problem with the drain pump - part #43 Tub, basket and agitator Diagram

Check that there is nothing jamming the pump impeller preventing it from operating correctly.

这个答案有帮助吗？

是否

得分 1

19条评论:

The dial is on the "regular" setting. Has numbers 15,12,8,4......then has a dot at "rinse" the dial is stopped exactly on Rinse. I was in the next room when it was running, I assume it ran normally until that point. Looked to be filled a typical amount for a small load......The pump looks easy enough to get off,...just waiting for the dirty towels to dry on my heaters to help catch the water. Previous load ran fine. The smallest thing in this load was a couple wash clothes, nothing seems to be missing....nothing had pockets that something could have been left in.

由 zinna b 完成的 2020年12月25日

i responded, but the bot said it was spam…even though clearly was not….have to wait for it to be reviewed…it will just be removed again if I try to re post.

由 zinna b 完成的 2020年12月25日

I assume I am supposed to remove the nuts to take the pump off, they don't seem to be coming off.....I wish this site allowed pics.

由 zinna b 完成的 2020年12月25日

my neighbor has my good socket wrench...i have to pick that up later to try....i can't see in the pump without taking it off..or dis assembling it which I really don't want to do.

由 zinna b 完成的 2020年12月25日

@zinniab

Here's how to add images to your QUESTION on ifixit

在已经存在的问题里加入图片

Try applying some WD-40 to the nuts and leaving it for 12-24hrs as this should loosen them. After 20+years no doubt they are frozen (rusted?) in position.

You may have no choice. If the pump is not blocked it may be faulty and have to be replaced anyway and it has to come out.

由 jayeff 完成的 2020年12月25日

显示更多的14条评论

添加一条评论

The dial is on the "regular" setting. Has numbers 15,12,8,4......then has a dot at "rinse" the dial is stopped exactly on Rinse. I was in the next room when it was running, I assume it ran normally until that point. Looked to be filled a typical amount for a small load......The pump looks easy enough to get off,...just waiting for the dirty towels to dry on my heaters to help catch the water. Previous load ran fine. The smallest thing in this load was a couple wash clothes, nothing seems to be missing....nothing had pockets that something could have been left in. — zinna b
i responded, but the bot said it was spam…even though clearly was not….have to wait for it to be reviewed…it will just be removed again if I try to re post. — zinna b
I assume I am supposed to remove the nuts to take the pump off, they don't seem to be coming off.....I wish this site allowed pics. — zinna b
my neighbor has my good socket wrench...i have to pick that up later to try....i can't see in the pump without taking it off..or dis assembling it which I really don't want to do. — zinna b
@zinniab

Here's how to add images to your QUESTION on ifixit

在已经存在的问题里加入图片

Try applying some WD-40 to the nuts and leaving it for 12-24hrs as this should loosen them. After 20+years no doubt they are frozen (rusted?) in position.

You may have no choice. If the pump is not blocked it may be faulty and have to be replaced anyway and it has to come out. — jayeff

洗烘一体机

Stopped on 'rinse' with buzzing sound, why

Update (12/25/2020)

Update (12/26/2020)

1个答案

添加你的答案