Dear,
Circuit priming message loops at beginning, then straigth away E05 error and asking to restart the machine, I did few times without sucess.
I opened the machine, and I can`t see any leak.
Any recommendation please?
My coffee machine is Royal gran crema
声誉积分: 153.3千
2.5千
28
1千
Error code 05 means that the flow meter does not give a signal. Now you have to search: is the flowmeter blocked or broken? Or the water cannot pass through, e.g. because the heater or the pump is calcified. In Saeco Royal Pumpe austauschen the flowmeter can be seen in step 6, picture 2. Open the flowmeter and clean it, it's easy.
这个答案有帮助吗？
过去的24小时： 8
过去的7天： 47
过去的30天： 257
总计 2,007
Hi . The problem with E05 is generated of many SAECO coffee machine , I had this problem and I fixed it . See the video below and I am sure it will helps you .
https://youtu.be/0YR-xtacx1U
由 KK-Pro 完成的