I pad will not turn on

Question

iPad 4 Wi-Fi

Fourth generation of iPad, released November 2, 2012, available in 16, 32, or 64 GB models. Model Number A1458

218 个问题查看全部

Assem Nagi @nagiassem

声誉积分: 1

1

发帖于: 2020年10月15日

更多选项

I pad will not turn on

I have an iPad that ran out of battery one day and hasn’t been able to charge ever since that day I pulled it out of my drawer of junk after it being in storage for four years and crossed my fingers but nothing. I’ve cleaned the lighting port connecter and have used the power adapter for my MacBook and nothing I’ve also tried to hard reset 10 times and nothing and left it charged for 2 days and nothing .Their is a very faint clicking noise when I connect the lightning cable. Any advice on what I can do to fix this issue?

PS sorry about the grammar.

已回答！ 显示答案我也有这个问题

这是一个好问题吗？

是否

得分 0

添加一条评论

2个答案

已选择的解决方案

Minho @refectio

声誉积分: 221.5千

15

290

807

发帖于: 2020年10月17日

更多选项

Sounds like a dead battery. You can replace it yourself by following this guide.

这个答案有帮助吗？

是否

得分 2

6条评论:

I tested the amperage and it says .005and the volts said 5 is that too low

由 Assem Nagi 完成的 2020年10月17日

Do you mean with a USB Ammeter? If so, what that is telling you is that no charge is taking place. Considering the age of the device and the time spent in a drawer, you almost certainly have a bad battery. That is the first thing to try.

由 Minho 完成的 2020年10月18日

I ordered a new battery and lighting port I will change them and let you know what happens thanks for replying.

由 Assem Nagi 完成的 2020年10月18日

Hello i ordered a new battery and replaced the battery works now but im getting an error that says

[Nand] _FindFlashMediAndKeepout: 601 physical nand block ofset 1

[nand]_fetchBorrowedList881 number of borrowed blocks 16

由 Assem Nagi 完成的 2020年10月22日

Hello again so i replaced the battery and the ipad turned on but it gave a NAND error 601 and said blocks borrowed 16 at the end of it also the amps that were drawn were 1.1 and then after a day that number went down to .01 is their anything else i should try?

由 Assem Nagi 完成的 2020年10月23日

显示更多的1条评论

添加一条评论

I tested the amperage and it says .005and the volts said 5 is that too low — Assem Nagi
Do you mean with a USB Ammeter? If so, what that is telling you is that no charge is taking place. Considering the age of the device and the time spent in a drawer, you almost certainly have a bad battery. That is the first thing to try. — Minho
I ordered a new battery and lighting port I will change them and let you know what happens thanks for replying. — Assem Nagi
Hello i ordered a new battery and replaced the battery works now but im getting an error that says

[Nand] _FindFlashMediAndKeepout: 601 physical nand block ofset 1

[nand]_fetchBorrowedList881 number of borrowed blocks 16 — Assem Nagi
Hello again so i replaced the battery and the ipad turned on but it gave a NAND error 601 and said blocks borrowed 16 at the end of it also the amps that were drawn were 1.1 and then after a day that number went down to .01 is their anything else i should try? — Assem Nagi