iPhone 8 Battery Draining Issues

Question

iPhone 8

发售于2017年9月22日。型号为 A1863, A1905。有 GSM 或者 CDMA 网络制式可选。提供64或者256GB 的存储空间。提供金色、银色和深空灰色。

873 个问题查看全部

Craig Nichols @worldsend2020

声誉积分: 71

1

发帖于: 2020年8月20日

更多选项

iPhone 8 Battery Draining Issues

Hi,

I’m new to the forum and I wanted to get some advice on steps to take for my iPhone 8. I’ve recently replaced the screen and battery within the phone and when i leave the phone (turned off) over night, from 100% battery it’ll be fully depleted and will require the cable to be plugged in to start the phone off again and charge the battery.

This is a fully working battery to my knowledge and has no signs of defects. What steps can you take to identify the issues and find out what’s causing the serious drain on the battery? I’m starting to think it’s something logic board related, but as i say, I’m new to this and I’m learning. I’ll take all advice I can get and steps to take to isolate the problem. If it is logic board I won’t be able to repair this myself as I don’t have the tools nor the skills to attempt this, but it would be nice to sell it on eBay as spares and repairs with some insight into what’s wrong with it for someone else to sort out.

Thanks for your time,

Craig.

已回答！ 显示答案我也有这个问题

这是一个好问题吗？

是否

得分 0

添加一条评论

2个答案

已选择的解决方案

Chris Stables @imicrosoldering

声誉积分: 50.7千

8

14

101

发帖于: 2020年8月20日

更多选项

It most likely a partial short on the logic board a VDD_MAIN, VDD_BOOST or another power line short would deplete the battery overnight.

To check this disconnect the all the LCD, home button and front camera flexes from the board and see if you get the same battery drain overnight. If you do it means you have a logic board problem. If it doesn’t drain it would point to a parts problem and the part can be determined by connecting one flex at a time and testing drain.

这个答案有帮助吗？

是否

得分 1

5条评论:

I think you could be right bud, I'm going to take your advice on board and see what I can find out. Thank you for this. I'll update this post at a later date with the results.

由 Craig Nichols 完成的 2020年8月21日

Hi mate,

I unplugged the cables as you said and kept the battery in the port. Its drained roughly 20% in around hours 2~ so I'd like to say this is a logic board issue? Any ideas on how to trouble shoot it from this point, as I'm keen to dive in and see if i can diagnose what part of the board might be causing the short.

由 Craig Nichols 完成的 2020年8月21日

@worldsend2020 The first thing you would need to do is check some power rails PP_VDD_MAIN and PP_BATT_VCC you would need a multimeter for this and a known good board or some board view software that has diode readings. There are many power rails you would have to check. Once you have found the rail you would have to diagnose which component on that line has become faulty, it could be an IC or capacitor. If you could not tell by a visual exam you would need a DCPS and a thermal cam or freeze spray to locate the fault.

由 Chris Stables 完成的 2020年8月21日

@imicrosoldering thank you very much for the help mate, I'll dive in soon and see what I can find before having to sell it on. I've got that zxw software and a fluke 15b+ meter, so I'll compare the diode readings on that. One more thing, can you recommend any beginner material to microsoldering or anything logic board repair related? I'm still yet to acquire the tools to start learning this, but I'd enjoy having some good material to learn from momentarily. Thought I'd ask since you clearly know what you're doing. Thanks bud.

由 Craig Nichols 完成的 2020年8月22日

@worldsend2020 There are a lot of repair shops that put repair videos on you tube like iPad rehab, STS telecom and

Apfeldoktor. Nothing is better than practice though. Get some iCloud locked boards to practice on so you know what heat temperature to set your equipment on for removing various components and re-balling them and putting them back on so the phone still boots.

由 Chris Stables 完成的 2020年8月23日

添加一条评论

I think you could be right bud, I'm going to take your advice on board and see what I can find out. Thank you for this. I'll update this post at a later date with the results. — Craig Nichols
Hi mate,

I unplugged the cables as you said and kept the battery in the port. Its drained roughly 20% in around hours 2~ so I'd like to say this is a logic board issue? Any ideas on how to trouble shoot it from this point, as I'm keen to dive in and see if i can diagnose what part of the board might be causing the short. — Craig Nichols
@worldsend2020 The first thing you would need to do is check some power rails PP_VDD_MAIN and PP_BATT_VCC you would need a multimeter for this and a known good board or some board view software that has diode readings. There are many power rails you would have to check. Once you have found the rail you would have to diagnose which component on that line has become faulty, it could be an IC or capacitor. If you could not tell by a visual exam you would need a DCPS and a thermal cam or freeze spray to locate the fault. — Chris Stables
@imicrosoldering thank you very much for the help mate, I'll dive in soon and see what I can find before having to sell it on. I've got that zxw software and a fluke 15b+ meter, so I'll compare the diode readings on that. One more thing, can you recommend any beginner material to microsoldering or anything logic board repair related? I'm still yet to acquire the tools to start learning this, but I'd enjoy having some good material to learn from momentarily. Thought I'd ask since you clearly know what you're doing. Thanks bud. — Craig Nichols
@worldsend2020 There are a lot of repair shops that put repair videos on you tube like iPad rehab, STS telecom and

Apfeldoktor. Nothing is better than practice though. Get some iCloud locked boards to practice on so you know what heat temperature to set your equipment on for removing various components and re-balling them and putting them back on so the phone still boots. — Chris Stables

Dylan Devries @dylandevries 声誉积分: 942 8 9 1 · Answer 1 · 2020-08-20T15:11:10-07:00

Dylan Devries @dylandevries

声誉积分: 942

8

9

1

发帖于: 2020年8月20日

更多选项

What is your battery health at? Go to settings-battery-battery health. Batteries, even rechargable ones degrade and go bad over time and need replacing.

这个答案有帮助吗？

是否

得分 0

1条评论:

The health is 100%, it's a brand new battery from GEARDO. I unplugged the battery overnight to see if it was potentially leaking, but when I plugged it in this morning it had the exact same battery % level. The results seem to be fine on 3utools also. Thanks for the advice though.

由 Craig Nichols 完成的 2020年8月21日

添加一条评论

iPhone 8

iPhone 8 Battery Draining Issues

2个答案

添加你的答案