Why is the right fan running at full speed after replacing battery.

Question

MacBook Pro 13" Touch Bar Late 2016

A1706/EMC 3071—于2016年11月上市，这台13''MacBook Pro带有OLED触摸条。以双核“Skylake”英特尔酷睿i5 CPU和4个雷电3端口为特征。

239 个问题查看全部

Steve Botts @stevendbotts

声誉积分: 35

2

发帖于: 2020年8月17日

更多选项

Why is the right fan running at full speed after replacing battery.

I replaced the battery in my MacBook Pro 13” Touch Bar Late 2016 using the iFixit battery replacement kit. After the battery was replaced, the right fan started running at full speed (approx. 8600 rpm). I rechecked all of the connections inside the computer including the touch bar connection as suggested, and the fan still continues to run. I downloaded two different fan control software applications, and am unable to control the fan speed. When I checked the computer’s hardware using the Apple hardware diagnostic application, it reported a reference code PPF004, indicating that there may be problems with the fan. I would appreciate any recommendations that you may have.

Any new ideas regarding my fan problems?

已回答！ 显示答案我也有这个问题

这是一个好问题吗？

是否

得分 2

添加一条评论

2个答案

已选择的解决方案

Dan @danj

声誉积分: 480.2千

Self employed contract worker

35

330

971

发帖于: 2020年8月17日

更多选项

PPF004 - is a fan error

Inspect the fans ribbon cable for damage, the Tach logic is not communicating to the logic board or the fan its self is damaged.

这个答案有帮助吗？

是否

得分 3

15条评论:

I will inspect the ribbon cables from the fans although I did not touch them during the installation of the batteries. Could the problem be related to anything other than damaged cables?

由 Steve Botts 完成的 2020年8月17日

Did you follow the guide to the letter? 更换MacBook Pro 13‘’2016年末期带 Touch Bar 版本的电池

由 Dan 完成的 2020年8月17日

I sure did, and i didn't touch anything having to do with the fans or the ribbon cables. I am wondering if the non-apple batteries provided in the repair kit are causing this issue.

由 Steve Botts 完成的 2020年8月17日

@stevendbotts - The PPF004 error is exclusive to your fan, the battery has no bearing here. If you followed the guide you do remove the logic board which requires disconnecting the fans.

由 Dan 完成的 2020年8月18日

Hi Dan, after receiving your comment, I was in doubt, so I completely disassembled my computer once again. I removed the logic board, and confirmed that the fans don't require disconnection. I checked the connections on both fans and confirmed they were connected properly. I have a MacBook Pro late 2016 with the touch bar and retina display. When I assembled the computer and powered it up, I had the same issue with the right fan running full speed. Do you have any other ideas?

由 Steve Botts 完成的 2020年8月18日

显示更多的10条评论

添加一条评论

I will inspect the ribbon cables from the fans although I did not touch them during the installation of the batteries. Could the problem be related to anything other than damaged cables? — Steve Botts
Did you follow the guide to the letter? 更换MacBook Pro 13‘’2016年末期带 Touch Bar 版本的电池 — Dan
I sure did, and i didn't touch anything having to do with the fans or the ribbon cables. I am wondering if the non-apple batteries provided in the repair kit are causing this issue. — Steve Botts
@stevendbotts - The PPF004 error is exclusive to your fan, the battery has no bearing here. If you followed the guide you do remove the logic board which requires disconnecting the fans. — Dan
Hi Dan, after receiving your comment, I was in doubt, so I completely disassembled my computer once again. I removed the logic board, and confirmed that the fans don't require disconnection. I checked the connections on both fans and confirmed they were connected properly. I have a MacBook Pro late 2016 with the touch bar and retina display. When I assembled the computer and powered it up, I had the same issue with the right fan running full speed. Do you have any other ideas? — Steve Botts