修复你的物品 社区 商店

索尼的新一代电视游戏机，于2013年2月20日发布，并于2013年11月15日开售。

1696 个问题 查看全部

更多选项

Missing Diodes / Resistors?

Hello all!

So i’m trying to make my quarantine as quick as possible So I bought myself a PS4 with a broken HDMI port the pads are still intact it’s just the middle plastic bit of the port has snapped off, I have some experience with hot air / soldering already, upon closer inspection the board appears to be missing 3 components, two I believe to be a DJ diode?

https://puu.sh/FJ3Av/855a6ed5e1.jpg

Will the console work without these?

If not what are the names of each component so I can start my shopping list.

Cheers!

已回答！ 显示答案 我也有这个问题

这是一个好问题吗？

是 否
得分 0
添加一条评论

2个答案

筛选条件:
最有帮助的 最新 最老的
已选择的解决方案

更多选项

Update: after using the PS4 for about a week there are no issues without the components so if anyone has the same issue, the PS4 will work fine withought them :)

这个答案有帮助吗？

是 否
得分 0
添加一条评论

更多选项

An HDMI port can be bought new or can be found on many scrap equipment desoldered then refitted to your machine. As for the apparently missing components! it is likely they were never fitted intentionally by the manufacture’s. Looking at the print side if the pads are clean then this may be correct.

这个答案有帮助吗？

是 否
得分 0

3条评论:

Thanks for the reply :)

I reflowed them with some leaded solder they did look a bit iffy, but after replacing the HDMI port I now get a picture, but if I move the HDMI cable while it's plugged in, the TV flickers then goes back to normal I have soldered all the pins on the port with a soldering iron and none of them move, I think what I need is a rectifier diode and a 2K resistor, I'll let you know if this makes any difference :)

由完成的

This ASH? It would seem the answer i gave him was no good at all but funnily enough it was correct.

由完成的

Hi

I can see why you would think that

But before I reflowed them there were bits of components left on the pads so they may be protection diodes or something

由完成的

添加一条评论

添加你的答案

Ash 将永远感激不已
浏览统计数据:

过去 24 小时： 0

过去 7 天： 4

过去 30 天： 10

总计 641