mouse switch replacement does work after soldering new switch on

I was soldering new switches on to my mouse pcb and during this attempt the old solder was very difficult to get out, I am not sure if i fried the pcb, but im guessing that is the case. Please let me know what you think.

Block Image

Block Image

Block Image

Block Image

回答此问题 我也有这个问题

这是一个好问题吗?

得分 0

评论:

looks like the solder trace has come off.... unless you know where it goes, it might be salvaged....

i have a feeling, either your soldering iron is not hot to melt / not enough flux.

完成的

添加一条评论