HDMI PIN 18 issue

Question

PlayStation 4

索尼的新一代电视游戏机，于2013年2月20日发布，并于2013年11月15日开售。

1697 个问题查看全部

Martin Jančík @marcinn

声誉积分: 61

3

2

发帖于: 2020年4月1日

更多选项

HDMI PIN 18 issue

Hello everyone,

I bought PS4 with faulty HDMI port to fix it, learn something and get some practise. I am now waiting for my new HDMI port, but I have noticed something on the bord. As I checked conductivity between PADs and points from the diagram, I found, that PIN 18 is not connected to the capacitor on the right side(18).

I have also noticed that the back side of the diode and capacitor(Yellow dots) are connected and both shorted to ground.( Front side of the diode and capacitor Is connected too, but not shorted to ground.) Is that right ? I dont have another board to compare with. And if yes, where does PIN 18 go? Could that be an Encoder IC fault?

回答此问题我也有这个问题

这是一个好问题吗？

是否

得分 5

3条评论

@marcinn ..please list which board you have for further diagnostics help

由 jostewcrew 完成的 2020年4月1日

Where can I get that? Theres SAB-001 on motherboard, Is that it?

由 Martin Jančík 完成的 2020年4月1日

https://www.youtube.com/watch?v=8Gi6B-ua... Watch this

由 mohamad_Faisal 完成的 2021年6月16日

添加一条评论

8个答案

@marcinn ..please list which board you have for further diagnostics help — jostewcrew
Where can I get that? Theres SAB-001 on motherboard, Is that it? — Martin Jančík

jostewcrew @jostewcrew 声誉积分: 2.2千 6 4 1 · Answer 1 · 2020-04-01T05:48:28-07:00

最有帮助的答案

jostewcrew @jostewcrew

声誉积分: 2.2千

6

4

1

发帖于: 2020年4月1日

更多选项

martin … for sab-001 follow this pinout.

https://www.youtube.com/watch?v=KTQ5JkaL...

skip to the end for the testing points. if it doesnt match, theres a fault. post back for further assistance.

这个答案有帮助吗？

是否

得分 1

10条评论:

Yes, the PIN doesnt match the video

由 Martin Jančík 完成的 2020年4月1日

youll want to remove the component that doesnt match and test out of circuit. if it tests good, place it back and continue. something is shorted. it could very well be the hdmi contoller. i would start there and recheck the pinouts.

由 jostewcrew 完成的 2020年4月1日

Okay, I am gonna try that, thank you

由 Martin Jančík 完成的 2020年4月1日

@jostewcrew so I have desoldered the diode and capacitor and noticed, that I have 3 pins on the HDMI controller (firts 3 from the left side behind the HDMI filters) shorted together. Dont you know where they should connect ? And when I removed the components, the pin Now connect to the right place

由 Martin Jančík 完成的 2020年4月1日

Sorry, not only First 3, also some that Are connected to HDMI filters are shorted with first 3 pins

由 Martin Jančík 完成的 2020年4月1日

显示更多的5条评论

添加一条评论

Piotr @pitkox 声誉积分: 1 · Answer 2 · 2020-08-01T09:51:24-07:00

Piotr @pitkox

声誉积分: 1

发帖于: 2020年8月1日

更多选项

Hi, I have the same problem, maybe someone could give us feedback about value of this cap and diode from working MB. For me its 1,5 Ohms from the left side of thie components.

Thank you!

这个答案有帮助吗？

是否

得分 0

添加一条评论