声誉积分: 1
1
Hello,
I’ve replaced my apple watch 3 GPS screen assembly, and got no touch.
I’ve tried force restart, cleaning the connector with Iso Alcool.
But I’ve notice a sticker broken on the bottom half of the ribbon cable.
Or do you know hos to diagnostic a broken cable ?
Thx!!
声誉积分: 2.7千
14
6
8
If you have a torn ribbon cable it is game over. The black tape broken is not a problem. I have documented my own problem with no touch after replacement and had to reseat the ribbon cable in the display screen connector for touch to work.
这个答案有帮助吗？
Thanks for your answer!
The ribbon cable is slightly bend but not torn, so i suppose it's not that.
And i tried to replug it using your guide, no change.
It their a special way to plug the middle ribbon ?
声誉积分: 217
3
2
Have you removed the battery before replacing the LCD. If not, remove the battery first and with display connected and press the power to remove any static charge in the components. It could give a chance. Careful while removing.. Don’t use too sharp objects as spudger and double check the battery connector while replacing.
这个答案有帮助吗？
I just tried it and it doesn't work either.
I don't understand, nothing look damage or missing....
过去 24 小时： 3
过去 7 天： 8
过去 30 天： 13
总计 747
3条评论
Have you contacted apple support
由 Mine turtle music 完成的
No because i replace it myself, so Apple won’t help me.
由 freyjamir 完成的
Did you ever find a solution? I have the exact same problem.
由 DrmrDee10 完成的