Jacuzzi Hotub J1000 Control Panel is Off and Interior LEDS Flashing

Question

Hot Tub

Repair information for hot tubs.

35 个问题查看全部

Eric @papavelo

声誉积分: 1

发帖于: 2019年12月21日

更多选项

Jacuzzi Hotub J1000 Control Panel is Off and Interior LEDS Flashing

We have a Jacuzzi J480 Hotub that is no longer operating. The J1000 Control Panel (#6600-857) is completely dark and the interior tub LEDs are flashing. Does anyone have any ideas what this means or have a technician’s manual? (please don’t send me the Home Owner Jacuzzi® Hot Tubs J-400 Error Conditions/ Error Messages as these don’t help).

Any guidance is greatly appreciated. I’m an EE so I’m pretty comfortable with my Fluke VM and wiring in electrical equipment.

回答此问题我也有这个问题

这是一个好问题吗？

是否

得分 0

添加一条评论

1个答案

jayeff @jayeff 声誉积分: 449.1千 11 366 1.4千 · Answer 1 · 2019-12-22T01:35:06-07:00

最有帮助的答案

jayeff @jayeff

声誉积分: 449.1千

11

366

1.4千

发帖于: 2019年12月22日

更多选项

Hi @papavelo ,

Don’t know the answer but here’s the 2010+ J400 Standard Troubleshooting Approach Manual. Hopefully it is not the one that you said not to post. Not exactly the same model unless they mean the J400 series. It also uses the J1000 control panel, so perhaps it is close enough to be of some help.

Given that the panel is “off” the first thing to check is that you have the required power supplied to the setup.

They make a point of saying that 208V will not work, and that 240V is required.

If the supplied power is OK then on p.28 it shows how to troubleshoot without the control panel.

这个答案有帮助吗？

是否

得分 3

添加一条评论

Hot Tub

Jacuzzi Hotub J1000 Control Panel is Off and Interior LEDS Flashing

1个答案

添加你的答案