声誉积分: 33
3
Can’t complete front panel replacement. Home button & digitizer ribbon cables won’t let me close front panel against chassis. Any suggestions how to place those ribbon cables so they are not on the way?
声誉积分: 1.5千
10
4
2
Is it the Touch Screen flex cable that is on the way preventing to proper assembly?
If yes, they go “hidden” behind the LCD and a little part goes hidden “inside” the chassis.
Is tricky and very hard to explain in words how to do it. I would recommend to look up for some videos “iPad Mini 3 Screen Replacement” and attention to details, this is the most important one.
Good luck!
这个答案有帮助吗？
过去 24 小时： 0
过去 7 天： 2
过去 30 天： 9
总计 82
2条评论
Make sense. You can tell how bended original cables was. I’ll try to fit them underneath chassis empty space.
由 bohdanhl93 完成的
Yeah it’s really tricky. Just to be safe I used heat gun to make ribbon cables more flexible and accurately fit cables underneath chassis and digitizer fit perfectly in place .
由 bohdanhl93 完成的