跳转到主内容

A1418/EMC3069/2017/3.0GHz四核心Intel Core i5、3.4GHz四核心Intel Core i5或3.6GHz四核心Intel Core i7处理器。于2017年6月8日发布。

175 个问题 查看全部

Single black vertical line down display

So as the title suggests, I have a black line down the display now.

This is self inflicted as I’ve just had to chop the whole bloody thing apart to upgrade the RAM and swap out the disk for a SSD - which all works fine btw, no issues there - but the end result has been this black line down the display.

Block Image

It doesn’t appear in screenshots nor on my second monitor so it’s isolated to the display or the display data cable. I’ve tried flushing NVRAM and I’ve tried looking for any discernible breaks of blemishes in any of the cables or circuits… nothing.

Any ideas?

已回答! 显示答案 我也有这个问题

这是一个好问题吗?

得分 1
添加一条评论

1个答案

已选择的解决方案

Ouch! You did your self in ;-{

In the process of removing the display you damaged the LCD panels connections along the edge. If you had gotten the special adhesive cutter which is part of this kit [关联产品丢失或禁用: IF173-005] it would have likely saved you.

Time for a new display assembly!

And here’s the the needed guide iMac Intel 21.5" Retina 4K Display (2017) Display Replacement

这个答案有帮助吗?

得分 2

6条评论:

I certainly did... ironically I did get a kit like that, it wasn't a pizza cutter though more like a little stanley knife.

I had a feeling that I'd busted the display, I have a replacement on on order now, the full unit - https://www.amazon.co.uk/gp/product/B07G... - but I've also got the display cable on order so was wondering if I could get away with just replacing that... I guess not!

Thanks for taking the time to answer.

完成的

If you are careful you can transfer the cables over. Do re-order the needed adhesive strips! make sure you've fully cleaned off the old adhesive and clean the surfaces with reagent quality isopropyl alcohol (85% or better) Drug store alcohol is junk!

完成的

Yeah I've scraped off all the old adhesive, but a rubbing is a good call so will get hold of some of that. Thanks.

完成的

Incidentally, this was the kit that I bought and used for this disassembly. I guess the cutter just went in too deep. https://www.amazon.co.uk/gp/product/B01M...

完成的

@Paul Aldred-Bann - Ah... The knife was not the correct tool here ;-{

Did you review the guides before you started??

完成的

显示更多的1条评论

添加一条评论

添加你的答案

Paul Aldred-Bann 将永远感激不已
浏览统计数据:

过去 24 小时: 2

过去 7 天: 16

过去 30 天: 43

总计 3,603