更多选项

Digitizer replaced, now charging and reboot issues.

Hi fellow techs,

I need a little help. The digitizer was replaced on my wife’s IPad 6 generation. I am having charging issues along with reboots. When plugging the tablet in, shows charging @ 62%, after 4 hours of charging it will go no higher than 62 %. When I unplug the tablet the battery level drops to 1% , if does not reboot, it will show battery level at 58%. You plug it back in it shows 62%. Any thoughts or suggestions would definitely be appreciated.

已回答！ 显示答案我也有这个问题

这是一个好问题吗？

是否

得分 0

添加一条评论

发帖于: 2019年10月29日

更多选项

Problem most likely is if the battery was disconnected from the logic board using the thin card method it is probably just some debris blocking the connection between the board and the battery.

You’ll need to clean up and reseat the connection of the battery connector which most of the time will fix this. I personally lift up the connector a bit with my nail with just enough space to have a soft bristle brush with 99% isopropyl alcohol on it to clean the connector gold contacts.

这个答案有帮助吗？

是否

得分 2

添加一条评论

iPad 6 Wi-Fi

Digitizer replaced, now charging and reboot issues.

1个答案

添加你的答案