修复你的物品 社区 商店

2016年9月16日发售。型号有A1661，A1784和A1785，支持GSM 和 CDMA 格式，存储容量有32GB、128GB以及256GB，颜色有玫瑰金、金色、银色、黑色、新的亮黑和红色。

1364 个问题 查看全部

更多选项

home button not working after screen replacement on iPhone 7 plus

I’ve read all the posts across a ride array and have asked other experience phone repair techs. I’ve read anything from yes it’s possible to no it’s not possible so I wanted to ask here.

I did a screen repair on a iPhone 7 plus and have been stumped since. After powering it on and confirming that the screen works I found that the home button no longer worked and the digital assistive button was on. I ordered a new button thinking that perhaps I damaged it in the transfer but alas the new one does not work either. I’m currently trying to figure out as to what my options are to get the button back to at least working as it did not turn on the assistive touch when I turned it back on.

My other thought is could it be that the connection cable to the home button came either damaged or dead on arrival or perhaps I damaged it when reconnecting it and this could be the issue.

Is this possible to fix without taking it to apple due to to cost or is it locked due to the limiter that was first implemented when apple released the iPhone 7 plus?

已回答！ 显示答案 我也有这个问题

这是一个好问题吗？

是 否
得分 0
添加一条评论

1个答案

筛选条件:
最有帮助的 最新 最老的
已选择的解决方案

更多选项

Sounds like you may have damaged the Home button flex during the replacement.

It is possible that the new LCD module is faulty, so to rule this out simply connect the original home button to the original LCD and see if that works. If so it’s simply an LCD fault.

What is more likely is Home button flex damage. Some specialist Micro-solderers may be able to repair, but they will be hard to find.

The best solution if you’re not concerned about Touch ID functionality then you can buy 3rd party home buttons such as the JC home button, but I have never personally tried these so cannot recommend.

这个答案有帮助吗？

是 否
得分 2

5条评论:

Okay, I was leaning towards that. I would try and connect the old screen but after I removed the button it literally (I kid you not) fell apart and I'm not sure I could actually manage to get it to go back together enough that I could reconnect and see.

由完成的

Well the flex for the screen has 2 connectors. The smaller one is how the home button connects to the board. If this cable still appears intact you can connect the home button to the screen and then just connect the smaller connector to the board.

Then power it up and see if you get any vibrator feedback when pressing the ho me button (But there will be no image)

由完成的

With the jc home button you put a small connector on the motherboard and it connects Bluetooth so when you are on airplane mode you can’t use it. It also clicks

由完成的

Noah, okay so the JC replacement clicks/moves like the older home buttons did? I had bought a spare one to try and see if that replacement would work. It didn't work and it moved which took me off guard as the 7 was the first one that didn't as I understand.

由完成的

There is a certain thing it comes with that you put on the motherboard

由完成的

添加一条评论

添加你的答案

Henry DeRolf 将永远感激不已
浏览统计数据:

过去 24 小时： 1

过去 7 天： 1

过去 30 天： 2

总计 201