跳转到主内容

与AirPort Extreme基站一起发布,这款配备硬盘的Time Capsule NAS上提供802.11ac速度。

56 个问题 查看全部

Is the cable next to power supply plug required?

Hello,

I was disassembling my Time Capsule in order to fix the fan issue and thought I unplugged all of the cables following the guide but missed one, a 2 wire plug which clips in on the board right above and to the left of the wan plug

Block Image

and looks like it was soldered to a small clip on the case next to where the power supply socket goes labeled 4315C

Block Image

I am not sure what the use of this is as I don’t see a button or anything corresponding to it, nor any clip referencing it. Before I put it all back together, is this needed to operate? can’t find any information on what this does.

Thanks in advance.

已回答! 显示答案 我也有这个问题

这是一个好问题吗?

得分 0
添加一条评论

1个答案

已选择的解决方案

You lost the reset button which is a small hole by the power plug that you can hit with a paper clip.

While the unit will work without the reset if you need to reset the unit it will be tricky as you’ll need to short the pins on the header.

这个答案有帮助吗?

得分 2

2条评论:

Thank you. Do you know if those wires are + or - like on some motherboards, if I can find a way to solder it back on, not sure which wire goes to left or right, I know the plug has a very small 4 and 6 where two wires go into it. If it is just completing the circuit it probably shouldn't matter, but this is apple, so want to make sure. Thanks again.

完成的

Switches tend not to have a polarity. When they are mounted in a metal case it might. Here its plastic and has none.

完成的

添加一条评论

添加你的答案

Nathan Truhan 将永远感激不已
浏览统计数据:

过去 24 小时: 1

过去 7 天: 6

过去 30 天: 10

总计 86