跳转到主内容

Released in 2016. Model Number: IMW888

7 个问题 查看全部

Loud Static upon powering on

My speaker does not say “Powering On, Altec Lansing” and there is a loud static coming from 2 speakers 1 on each side of speaker and then a low hum on both sides of the speaker 1 speaker each. It connects to the Bluetooth connection on my phone and the aux cord to my phone but I cannot hear any music, just loud static.

回答此问题 我也有这个问题

这是一个好问题吗?

得分 1

3条评论:

I have the exact same problem with mine. Wish someone knew what the issue was. I've even talked to tech support with no luck. All they say is to drain the battery and then try again..

完成的

yes I have the very same problem

完成的

What brought it to this point its not exact model but same issue as well as loud pops

完成的

添加一条评论

1个答案

Replace the pcm1808 chip on the main board. Hours of troubleshooting so you're welcome . When this chip is going bad it causes static, when it dies you lose audio

这个答案有帮助吗?

得分 0
添加一条评论

添加你的答案

Mitch Saunders 将永远感激不已
浏览统计数据:

过去 24 小时: 5

过去 7 天: 10

过去 30 天: 28

总计 476