3D and Ghost Touch after refurb

Question

iPhone 8

发售于2017年9月22日。型号为 A1863, A1905。有 GSM 或者 CDMA 网络制式可选。提供64或者256GB 的存储空间。提供金色、银色和深空灰色。

873 个问题查看全部

Joseph Eke @jeke

声誉积分: 11

1

发帖于: 2019年5月4日

更多选项

3D and Ghost Touch after refurb

I have been refurbishing iPhone 8 screens recently. Got my first one spot on, no dust, bubbles or glue etc. Plugged it into an iPhone 8 and works perfectly. Continued to install the heat shield, home button and camera flex etc ready to be sold and then all of a sudden it started ghosting? I thought it could be shorting the board somewhere so I applied some sellotape to the heat shield where Apple has some adhesive, left it a while and came back to it. Now 3D Touch does not work (it was before) and the screen is still ghosting!

Ahhhhh!! Any help will be greatly appreciated. I have also updated the software to the latest version.

refurb business is so tricky!

已回答！ 显示答案我也有这个问题

这是一个好问题吗？

是否

得分 0

1条评论

So how can 3rd party non genuine screens work perfectly well every time I’ve put one on then? That doesn’t make sense?

由 Joseph Eke 完成的 2019年5月4日

添加一条评论

2个答案

已选择的解决方案

Tom Chai @tomchai

声誉积分: 73.8千

19

111

82

发帖于: 2019年5月4日

更多选项

That’s just how it is. The screen has to be individually calibrated, without the original Apple calibration machine, you can only hope for getting a screen that matches your device’s electrical and mechanical properties.

And with iPhone 7 and later, the issue is much worse because different suppliers manufacture screens with very different performance ranges. You are much more likely to install a screen that has different characteristics from the original one the device came with, and you don’t have the tools to recalibrate it.

这个答案有帮助吗？

是否

得分 2

2条评论:

How does a copy screen manage to work every time then? These won’t have been calibrated either?

由 Joseph Eke 完成的 2019年5月7日

That’s right, they don’t. However most of them were dismissed simply as quality issue.

由 Tom Chai 完成的 2019年5月7日

添加一条评论

So how can 3rd party non genuine screens work perfectly well every time I’ve put one on then? That doesn’t make sense? — Joseph Eke
How does a copy screen manage to work every time then? These won’t have been calibrated either? — Joseph Eke
That’s right, they don’t. However most of them were dismissed simply as quality issue. — Tom Chai

Minho @refectio 声誉积分: 221.4千 15 289 807 · Answer 1 · 2019-05-04T10:59:51-07:00

Minho @refectio

声誉积分: 221.4千

15

289

807

发帖于: 2019年5月4日

更多选项

You might want to try a Refurb group on Facebook…lot’s of qualified folks on those to help out. This forum tends to have very few active refurbishers.

这个答案有帮助吗？

是否

得分 2

添加一条评论

iPhone 8

3D and Ghost Touch after refurb

2个答案

添加你的答案