I plugged in wrong voltage supply and the dreamcast got burnt.
I plugged in wrong voltage supply and the dreamcast got burnt. How can I repair it ?
563160
声誉积分: 13
2
1个答案
已选择的解决方案
声誉积分: 44
3
Hi,
I would try opening it up and check around the area where the power supply is located.
This guide covers the opening process:
Replacing Sega Dreamcast Power Block (Power Supply)
You will most likely find a burned component in the power supply board. If you own or have access to a soldering iron, you could try replacing the damaged components. Alternatively, could buy a new US Dreamcast power supply on eBay for around 20 dollars and replace it with the faulty one.
这个答案有帮助吗？
得分
1
It can turn on but can’t read disc. Is it wrong with the power supply or the main board ?
This may be because it is a NTSC system. If you try to run PAL based video games it wont run. You will need a NTSC game for a NTSC system otherwise it will not accept the discs.
12条评论
What do you mean when you say it got "burnt"? Please add an image showing the damage
在已经存在的问题里加入图片
由 John 完成的
I don't have the device right now. I plugged in a 220v adapter and a burnt smell came out.
由 Aldous 完成的
Ok then before you do anything you should open it up to see if there is any phisical damage. Try to get the device and open it. https://youtu.be/FkKvaSmwRm0?t=39
由 John 完成的
I haven't opened it. Do you think anyone can repair it ?
由 Aldous 完成的
You could look up online for a repair shop near you. Sega® has ceased support for the Sega Dreamcast. Before you do that, however, I would open it up to check to see if there actually is damage.
由 John 完成的
显示更多的7条评论