跳转到主内容

2014年9月19日发布的iphone 6 Plus有着比iphone 6大的5.5英寸屏幕。

1525 个问题 查看全部

My screen suddenly stops touching and it starts flickering grey

My screen suddenly stops touching  and  it starts flickering grey stuff on the screen, while this happens I cannot use the touchscreen, and stuff just sytarts typing or touching on its own, I have to bend or press the screen and phone before it disappears and it starts touching again, sometimes but rarely does it disappear on its own. I have had the phone for a year, and this started a few weeks ago. I gave it to a repair guy who charged me a large sum for it, he said it was a faulty motherboard, he took it and brought it back saying it’s been fixed, I didn’t see the problem for a week and then the problem started again, I called him up and he said I should change the motherboard, but it’s very costly. Could it be the screen? Should I change the screen? please let me know what the issue could be. Please help

已回答! 显示答案 我也有这个问题

这是一个好问题吗?

得分 0
添加一条评论

1个答案

已选择的解决方案

Whoever charged you a large sum has scammed you, they have most likely done a reflow or a similar botched repair in the hopes that it fixes the touch IC issue.

This should of been a permanent fix which involves running a jumper under the M1 pad for the touch IC chip for at around $80-$160 for touch IC repair.

I recommend getting your money back and going to another store that is more reputable.

这个答案有帮助吗?

得分 3

3条评论:

Hi thanks for answering, could you please put it in simpler terms, I’m sorry

完成的

Basically the grey vertical lines at the top of the screen indicate there is a problem from the touch screen controller chip which is on the logic board.

The person that tried to repair it did a reflow which is re-melting the solder joints under that touch IC chip which is not the solution to fixing this problem properly. While it may fix it, it will resurface again sooner or later.

The proper fix would be to remove that chip, adding a jumper wire to the M1 pad to re-inforce connection between the chip and the logic board (this is a pad that commonly breaks off under the touch IC chip) then either adding that chip back on or putting a new touch IC chip on.

完成的

Okay I understand, thank you very much

完成的

添加一条评论

添加你的答案

Charis 将永远感激不已
浏览统计数据:

过去 24 小时: 0

过去 7 天: 0

过去 30 天: 0

总计 31