声誉积分: 35
1
Hi,
I am repurposing an iMac 7.1 (A1224) to external monitor+HDD+Speaker+Camera for my new Mac Mini.
I read that the camera cable is essentially a 5V/GND/Data+/Data- that I can solder to an USB cable easily. Now I am a surprised to find out that the cable is actually 5 wire, as seen on the picture below.
Thick Black - blue - green - white - grey.
I already gutted the iMac, can’t measure voltage on the cable. Can anyone help me out with a pinout?
声誉积分: 55
2
1
Hi, I have your same isight and I successfully solved it in the following way:
这个答案有帮助吗？
the colors of the iSight may vary, mine had Black (corresponding to black USB) Grey (corresponding to red USB) and two Whites (corresponding to white and green USB). I used the first photo to compare wiring position tome my guessing.
As you have two white cables you'll have to make try & error, bad connection (of these two cables) make no harm as they are data ones.
Be careful with the other ones as the carry the DC feed)
How do i connect them if i have grey purple white brown/orange and black? My imac is the a1312
声誉积分: 79
5
2
1
ive done this before with a late 2009 imac which has the same connection, from what i remember one of the wires isnt needed when spliced to a usb cable and can be ignored
这个答案有帮助吗？
声誉积分: 478.9千
35
329
970
The iSight camera unit connector is wired like this:
It offers dual mics, IR and camera which is why it has a few more wires
这个答案有帮助吗？
过去 24 小时： 0
过去 7 天： 2
过去 30 天： 43
总计 1,944
