跳转到主内容

Any small, single-cylinder carbureted gasoline engine, usually used for lawnmowers. The engine used to create these guides is a Briggs and Stratton 300e series engine.

20 个问题 查看全部

push rods to valves fall out. model #204412

no gunk or buildup on guides or valve stems. am scratching my head.

已回答! 显示答案 我也有这个问题

这是一个好问题吗?

得分 0
2条评论

Maybe B&S had a bad flaw in there design.

完成的

Lol I just got one of these in with that problem. I was attempting to look up the part number when I saw this. I have also seen ,on a couple larger engines, that the bolt holding the rocker in the center had backed out, causing the valve to become so loose that the rod slipped out. Oh, well, back to trying to find the part # for this bent rod.

完成的

添加一条评论

1个答案

已选择的解决方案

Current Briggs&Stratton ohv engines have a known tendency for the valve lash adjustments to back off and become very loose over time. If you have one of these units you should adjust them at least once a season to correct clearance specification. Find specifications on line based on model number stamped on valve cover. If the push rod has fallen out you should remove it and inspect to ensure it has not become bent due to the abuse it suffered while operating with so much excessive clearance (another common failure).

这个答案有帮助吗?

得分 3
添加一条评论

添加你的答案

Robert Lee 将永远感激不已
浏览统计数据:

过去 24 小时: 0

过去 7 天: 0

过去 30 天: 3

总计 305