跳转到主内容

发售于2017年9月22日。型号为 A1863, A1905。有 GSM 或者 CDMA 网络制式可选。提供64或者256GB 的存储空间。提供金色、银色和深空灰色。

873 个问题 查看全部

phone screen flickering after screen replacment

I have replaced an iphone 8 screen dispaly assembly, however the screen keeps flickering, I have checked the connections and it seems fine, I am at a loss, can anyone advise?

已回答! 显示答案 我也有这个问题

这是一个好问题吗?

得分 0
添加一条评论

2个答案

已选择的解决方案

Always make sure you disconnect the battery before doing any work on a phone, so you don’t short anything out.

  1. You have a bad part. The backlight can malfunction from time to time on replacement parts. You’ll need to send it back and get another screen.
  2. In the past I’ve heard that static electricity can cause this. I have seen where if you disconnect the screen and let it sit for about 15 minutes, any static built up will discharge and the flicker will go away. I have also seen where charging the phone for an extended amount of time will fix the issue too.

这个答案有帮助吗?

得分 1
添加一条评论

Probably the problem is due to the interference of GSM radio signal. Problem persist in flight mode?

这个答案有帮助吗?

得分 0
添加一条评论

添加你的答案

Tracey Homeward 将永远感激不已
浏览统计数据:

过去 24 小时: 0

过去 7 天: 12

过去 30 天: 36

总计 3,108