更多选项

My Washer fills then does wash cycle , drains but does not fill again.

I only have one water source cold water. The first indication of trouble was it would not fill up with water. So I checked the filter screens, which were clean then I changed the water connection to the hot water input and selected hot water on the control panel. after this it filled normally. then washed one cycle and would not refill on it’s own.

I can fill washer with the garden hose at this point and it will continue the rinse cycle

已回答！ 显示答案我也有这个问题

这是一个好问题吗？

是否

得分 1

3条评论

Did it empty and fill than empty again befor

由 Darkened wolves 完成的 2019年2月17日

I am not sure but I will pay attention and add a note . Thanks for taking the time to post

由 David Major 完成的 2019年2月17日

Kenmore model 110

由 David Major 完成的 2019年2月21日

添加一条评论

发帖于: 2019年2月18日

更多选项

Hi @yoclem ,

You may have a problem with the cold water inlet solenoid in the washer.

Don't know your washer but on some when you select a hot water wash, on the wash (agitate) part of the cycle you get a hot water wash but not a hot water rinse which follows the wash, it is cold water. There may be only one wash type option (mostly wool wash -if you have it) that has a hot (or warm - hot and cold) rinse.

Check the user manual for your model to see what the rinse cycle temperatures are for each wash type option (regular, heavy, delicates etc) that you have.

If one of them has a hot (or warm) water rinse as part of the cycle try running that wash cycle with the water connected to the machine’s hot water inlet. If it fills for the rinse part of the cycle it points to a problem with the cold water solenoid.

What is the full model number of the washer?

这个答案有帮助吗？

是否

得分 3

添加一条评论

Kenmore 400 Washer

My Washer fills then does wash cycle , drains but does not fill again.

1个答案

添加你的答案