More than one screen for iPad Mini 4?

Question

iPad mini 4 Wi-Fi

iPad Mini4 Wi-Fi版型号A1538指南。iPad Mini3的后继版本iPad Mini4 发布于2015年9月9日。

97 个问题查看全部

Dan West @dccloud

声誉积分: 1

发帖于: 2019年1月13日

更多选项

More than one screen for iPad Mini 4?

I recently purchased a new screen and digitizer for the iPad Mini 4 Wi-Fi/Cellular model A1550. The repair instructions were accurate, but…To remove the home button I was told to flip up the retaining flap and unplug the cable from the ZIF socket. All well and good but the replacement screen does not have a retaining flap and the socket is different. I can not proceed. Did I order/was I sent the wrong part? Do I need a different home button? I don’t care about the sleep/wake function I just need to be able to ‘turn on’ the home screen. (And I know I may be using the terms for screen and digitizer wrong.) Any thoughts would be appreciated.

已回答！ 显示答案我也有这个问题

这是一个好问题吗？

是否

得分 0

添加一条评论

1个答案

已选择的解决方案

Minho @refectio

声誉积分: 221.5千

15

290

807

发帖于: 2019年1月13日

更多选项

The replacement screen for the iPad mini 4 works on both the WiFi and LTE versions of the device. If you ordered the screen from iFixit, contact support (help.ifixit.com).

这个答案有帮助吗？

是否

得分 2

2条评论:

I hate to argue with someone who was so quick to try to help me but there is a repair guide for the iPad Mini 4 on the ifixit site and it uses the term ZIF socket in step 31. The picture it shows is the style that I have on my iPad Mini 4 Wi Fi/Cellular but not what I was sent. Maybe I mis-communicated in my post. Thank you.

由 Dan West 完成的 2019年1月13日

No worries, my mistake :>). You mean this right?

I was thinking of the HB connection on the logic board, not the actual screen assembly. Sometimes the retaining flap can be damaged or pried off. Without it, the connector won't work properly. Contact your vendor and have them address this issue. You should probably post (add it to your original question) a picture so that we can see the connector to give you better direction.

由 Minho 完成的 2019年1月14日

添加一条评论

I hate to argue with someone who was so quick to try to help me but there is a repair guide for the iPad Mini 4 on the ifixit site and it uses the term ZIF socket in step 31. The picture it shows is the style that I have on my iPad Mini 4 Wi Fi/Cellular but not what I was sent. Maybe I mis-communicated in my post. Thank you. — Dan West
No worries, my mistake :>). You mean this right?

I was thinking of the HB connection on the logic board, not the actual screen assembly. Sometimes the retaining flap can be damaged or pried off. Without it, the connector won't work properly. Contact your vendor and have them address this issue. You should probably post (add it to your original question) a picture so that we can see the connector to give you better direction. — Minho

iPad mini 4 Wi-Fi

More than one screen for iPad Mini 4?

1个答案

添加你的答案