跳转到主内容

苹果官方于2015年9月25日正式发售iPhone6S A1688/A1633机型。 此机型的修理方式与先前几代差不多, 需要螺丝起子及撬棍工具。 同时也适用GSM or CDMA/16, 64 or 123 GB/ 银色, 金色, 深空灰色, 玫瑰金色等机型。

2690 个问题 查看全部

Replace iPhone 6s motherboard with iPhone se's

I've read everywhere that the iPhone se is basically a smaller version of the 6s, so if my motherboard is damaged (6s) is it possible to replace it with one from the iPhone se? I am aware there are size differences but are the parts the same?

已回答! 显示答案 我也有这个问题

这是一个好问题吗?

得分 2
添加一条评论

3个答案

已选择的解决方案

No way, the two have in common the same processor and quite a big number of components, enough to have a similar performance and main characterics, but that’s all for similarities. Logic boards shapes are extremely different and not at all compatible..you could never fit an SE board into a 6s housing and viceversa.

这个答案有帮助吗?

得分 3
添加一条评论

you can get some of the correct ones off ifixit! https://www.ifixit.com/Store/iPhone/iPho...

whats wrong with your current one specifically?

这个答案有帮助吗?

得分 2
添加一条评论

I have a brand new iPhone se 3rd gen but for reasons that are best left u addressed or discussed I would like to install a working 6s motherboard and processor into the iPhone se 3rd gen. Is this possible? Thank you kindly in advance for not forcing me to state WHY I’m needing to do this, it is ridiculous but I however have promised to give my very best effort in completing this task but only of course IF the iPhone 6s motherboard’s sockets can mate perfectly with the brand new and activated iPhone SE 3rd gen’s other internal components ribbons/clips and also if there are no components with interchange coded restrictions etc…

Thank you kindly for any expert and professional or accurate information that you can offer.

Blessings to you.

这个答案有帮助吗?

得分 0

3条评论:

no, and the 6s board is wayyyyy older(by about 8 whole years!) , meaning there's no way the connectors on the board are modern enough. and the fact that there is no interchangeable boards in between ANY iphone models, nor will there ever be i bet.

完成的

As @timtomissus has said, there's no chance of interchange. Every single phone Apple makes has the logic board custom designed for that specific model. Each new phone model is made to hold the components for that model, to fit in the space available and connect to all the peripherals included. So even on very close models like say the 5 and 5S, there's no changing between chassis.

完成的

Thank you guys and your answers will bring the conclusion to the thoughts of the matter.

I was pretty certain that this would be the case however I needed to reach out for some back up.

I am a computer/pc tech but I’ve not ever but done battery and screen replacements on iPhones.

Thanks again to you both for your help.

Best regards.

DK

完成的

添加一条评论

添加你的答案

Claire Park 将永远感激不已
浏览统计数据:

过去 24 小时: 2

过去 7 天: 10

过去 30 天: 33

总计 1,320