跳转到主内容

Shark Ultimate Professional 1800-watt clothes iron, identified by model number GI505.

10 个问题 查看全部

steam button failed on my Shark Proffessional iron.

My steam button has failed on my Shark Proffessional iron. Button stays down. Can I repair this?

I saw a blog from someone with the same problem and they tried prying the button up and griping the piston below it to raise it. This seemed to work for them. I tried and the button will not come off when pried up. I cannot see a way to open the iron from the top. Anyone with a solution?

回答此问题 我也有这个问题

这是一个好问题吗?

得分 0
添加一条评论

3个答案

最有帮助的答案

I just use a pair of tweezers and pliers. I believe it just get stuck every once in a while.

1. Remove steam button with pliers

2. Use tweezers to pull up white stem inside.

3. Replace steam button.

这个答案有帮助吗?

得分 1
添加一条评论

I had the same problem and took mine completely apart. To get the buttons out you have to grab them with pliers and pull up hard. The problem is actually a rubber seal at the end of the piston. After only 15 months of use the rubber had deteriorated and deformed so the piston gets stuck. It looks like the steam just destroys the seal. Unless someone knows where to get the seals there is no way to repair your iron.

这个答案有帮助吗?

得分 0
添加一条评论

Thank you…followed your directions, and it worked!

这个答案有帮助吗?

得分 0
添加一条评论

添加你的答案

Michele Van Saun 将永远感激不已
浏览统计数据:

过去 24 小时: 8

过去 7 天: 15

过去 30 天: 79

总计 4,646