Smok x-priv bricked, turns on to show smok logo and cuts out

Question

E-Cigarette Vaporizer

An E-Cigarette vaporizer is a device used to heat a substance, such as cannabis or tobacco, to a temperature at which it releases a vapor that can be inhaled. It is a reusable alternative to traditional smoking.

121 个问题查看全部

Tom Norc @tomnorc

声誉积分: 1

1

发帖于: 2018年12月6日

更多选项

Smok x-priv bricked, turns on to show smok logo and cuts out

hi all i have a Smok x-priv mod donated from a friend it started with a short in the atomizer error so i cleaned the port for the tank and checked the batteries etc, i then plugged it into my laptop to charge, as soon as i plugged it in it went to a black screen and would not turn on, the only way i can get any activity is by taking out the batteries and putting them back in, this brings up the smok logo and then it shuts down, does anyone have the firmware for this device so i may try reinstalling it, i have tried the method mentioned in another post saying to hold down all buttons without batteries, and to connect to a pc then put the batteries in but this did nothing

回答此问题我也有这个问题

这是一个好问题吗？

是否

得分 1

3条评论

also any info on how to remove the firmware from my bricked device would be appreciated thanks peeps, cant seem to find it when i connect it to my pc

由 Tom Norc 完成的 2018年12月6日

mam ten sam problem przy xpriv baby

由 kathia1982k 完成的 2019年6月18日

None of these solutions work.

由 Noel Hermogenes 完成的 2022年11月8日

添加一条评论

4个答案

also any info on how to remove the firmware from my bricked device would be appreciated thanks peeps, cant seem to find it when i connect it to my pc — Tom Norc

Jason Egger @noxiouskarn 声誉积分: 37 1 · Answer 1 · 2019-03-11T08:30:58-07:00

Jason Egger @noxiouskarn

声誉积分: 37

1

发帖于: 2019年3月11日

更多选项

I just had to run to my local vape shop as i was having the same issue it took me and the owner a few minutes to figure it out.

If you know how the locking on this device works you have to do that after you put in the batteries. After the smok logo disappears just tap the firing button five times not to fast or slow and then wait a second it should show the smok logo again and then then screen will show all the info and be ready to fire. it’s not software it’s user error and man you’re not alone.

Update 11/19/2020: Just got a notification via email about this thread. I decided it would be a good idea to make a video showing the method. GL out there!

https://youtu.be/aW9TLG9Z72o

这个答案有帮助吗？

是否

得分 3

4条评论:

For me not working but I have the same issue the logo shows when I put batter's but not screen with info. Thanks, if you have another solution I would by happy to hear it.

由 v4jas v4junas 完成的 2020年1月8日

Ok so put batteries in when logo comes on wait till it goes off then press the fire button 5 times it will start up agen

由 James Hislop 完成的 2021年9月26日

Love you bro, feeling stupid not trying this before googling for an hour ;) <3

由 Kristian Timmermand 完成的 2022年8月2日

Does not work

由 Noel Hermogenes 完成的 2022年11月8日

添加一条评论

NopeNotEven @nopenoteven 声誉积分: 37 1 · Answer 2 · 2020-03-08T01:44:03-07:00

最有帮助的答案

NopeNotEven @nopenoteven

声誉积分: 37

1

发帖于: 2020年3月8日

更多选项

This may be a very late reply but I had the same issue and I was very concerned.

To fix I inserted the charging cable, the charging screen popped up and then I pressed the firing trigger 5 times.

All fixed now.

这个答案有帮助吗？

是否

得分 3

2条评论:

Again, this solution does not work

由 Noel Hermogenes 完成的 2022年11月8日

I not working for mee, I pres five time, with logo, before logo, on charging screen , and nothing, and the batteries is new I buy them today , any ideas, please

由 Marcus Petreus 完成的 2022年10月1日

添加一条评论