声誉积分: 1
1
I have a 1999 Toyota Rav4 2.0L and I've replaced coils, plugs, timing belt, crank sensor and cam sensor, did continuity test from crank sensor and cam sensor to the computer and the wiring checks out ok, but its still throws a p0340 code for cam sensor, any ideas would be greatly appreciated
声誉积分: 25
1
Engine vacuum leak will cause it to run rough and can throw ecm / cam sensor code
这个答案有帮助吗？
声誉积分: 1
1
checked wires? follow the harness back, look for breaks or rubbing.
这个答案有帮助吗？
Maybe bad one out the box?
I took it back off, did ohm reading and passed a piece of metal in front of it and its putting out correct voltage!
过去 24 小时： 0
过去 7 天： 3
过去 30 天： 6
总计 247
1条评论
Yes, checked all wiring and did continuity test from crank and cam sensor connector to ecm connector and checks out ok, thinking it may be the ecm but wanted a second opinion I guess
由 crogers_2882 完成的