声誉积分: 33
3
1
My iphone sim reader and the metal bracket that cover it need to be replace. I can handle the sim reader, I think. but does anyone know how to replace the metal bracket that covers the sim reader. Does it need to be soldered on or can I just glue it on.
声誉积分: 7.4千
15
5
10
I've always done the repairs with the bracket in place. If it isnt preventing the sim tray from going in, then leave it be, you can do it from front side if you have a small enough iron.
这个答案有帮助吗？
Thanks but it was broken so I had to take it off. Can I just stick it on, I think its only function is to retain the sim card and tray
Thanks but it was broken so I had to take it off. Can I just stick it on, I think its only function is to retain the sim card and tray Submit
Yea all it does is just retain the tray. If the tray stays without it, I would leave it out.
过去 24 小时： 0
过去 7 天： 0
过去 30 天： 0
总计 1,046
1条评论
Thanks but it was broken so I had to take it off. Can I just stick it on, I think its only function is to retain the sim card and tray
由 Maureen Kelly 完成的