跳转到主内容

Fourth generation of iPad, released November 2, 2012, available in 16, 32, or 64 GB models. Model Number A1458

218 个问题 查看全部

Ipad 4 will not charge now that it has died

The IPad's battery drained last night from normal use. Put it on the charger but it would not charge at all.

When plugged in it would show the apple logo then change the the battery image in the red. It also makes the charging beep every time the apple logo is displayed. If I unplug the charger it displays the logo at the bottom showing it needs to be plugged in.

Not sure if related but the charger gets very hot when charging it.

I don't know much about Apple products, but I have visually inspected both the charger and the port and saw couldn't see anything obviously wrong. I have done Home+Power button to restart with no change.

Thanks in advance.

已回答! 显示答案 我也有这个问题

这是一个好问题吗?

得分 1
添加一条评论

1个答案

已选择的解决方案

It’s probably a dead battery, especially if this is the original battery. The iPad 4’s are getting old now and it’s normal for the battery to degrade. Eventually, it just refuses to charge. You can try to replace it yourself by following this guide.

When troubleshooting charging issues, I would do the following (in order):

  1. Always try another Lightning cable and charger, preferably Apple original or MFi certified units.
  2. The Lightning cable 8-pin connector should be sitting flush with the housing and completely inserted. If it is not, there could be lint/dust/debris inside the port impeding a proper connection. You can clean it out with fine point tweezers or a dental pick. Just be careful not to damage the pins inside the Lightning Port.
  3. Change the battery. The battery is the weakest link in the entire phone and certainly for charger related issues. It is also the easiest thing to replace. Use a battery utility, such as coconutBattery (for Mac) or 3uTools (for Windows) to test the battery prior to removal. Anything less than 70% of design capacity will require replacement.
  4. If the battery is in good condition, you can use a USB Ammeter to determine if the phone is really drawing current when it says it's charging. If it isn't drawing current, then I would change the Lightning/Charge Port.
  5. If a new battery and charge port still don't resolve the issue, then you either have faulty replacement parts (possible) or a logic board issue.

这个答案有帮助吗?

得分 4

2条评论:

Sent out for a new Apple brand power cable and adapter, I'll let you know if that solves it. Fingers crossed. Thank you.

完成的

Looks like the new charger solved the problem. Thanks for the help!

完成的

添加一条评论

添加你的答案

Aaron Russell 将永远感激不已
浏览统计数据:

过去 24 小时: 2

过去 7 天: 3

过去 30 天: 12

总计 1,661