跳转到主内容

发布于2017年3月3日,任天堂 Switch 是一款可以在电视和路上玩的掌机。

525 个问题 查看全部

No HDMI to TV using Nintendo Switch Dock after USB-C Port Replacement

Switch had a damaged USB-C port with broken pins. Replaced the USB-C port with a new one and now it charges fine and everything works great except for the Nintendo docking station to output to HDTV.

When I connect the Switch to the dock, it does receive a charge through it and the green light to indicate it’s outputting to an HDTV lights up, but no image or sound is produced on the TV.

I have already gone through Nintendo’s official troubleshooting steps with basic things like trying other TV’s, other HDMI cables, etc. I have tried different combinations of the order in which I plug the cables into the dock before I actually connect the Switch and none of that has made any difference. In fact, according to Nintendo, if I am getting the green light on the dock but there is still no image displayed on the TV, then I should send it in for repair. Heh.

So rather than drop close to $90 for an official Nintendo dock or $40 for a third-party dock, does anyone have any other suggestions? Is there any way to go about troubleshooting the controller board inside the docking station? Could the USB-C port I used to fix the no charging issue due to the damaged pins be to blame? Could the damage to the original USB-C port have caused other damage to diodes, resistors, ICs?

Thanks.

已回答! 显示答案 我也有这个问题

这是一个好问题吗?

得分 4
添加一条评论

1个答案

已选择的解决方案

To anyone else facing this issue - Go back and check your soldering job on the USB-C port. The lower row of pins on the port was to blame. One or more of them may not have been soldered properly.

Block Image

这个答案有帮助吗?

得分 4
添加一条评论

添加你的答案

TechWizard 将永远感激不已
浏览统计数据:

过去的24小时: 5

过去的7天: 23

过去的30天: 111

总计 6,764