修复你的物品 社区 商店

这款4.7英寸iPhone于2014年9月19日发布，是iPhone 6 Plus的缩小版。

4994 个问题 查看全部

更多选项

iPhone does not want to turn on

I got a IPhone 6 here that does not want to turn on.

I can confirm the battery is still good because when I move the battery over to another IPhone it starts right up.

Battery does have juice in it, it is not dead.

The LCD is bad however but it should still turn on.

I don't think it's black-light damage because the phone should turn on if it was.

I've tried:

  1. Holding Power button and home button for 1+ minutes.
  2. Connecting to a Computer, (Computer does not detect phone)
  3. Use a brand new screen and LCD, still no luck.
  4. Left it to charge for more than 1 hour

Any ideas?

I appreciate it!

回答此问题 我也有这个问题

这是一个好问题吗？

是 否
得分 0
添加一条评论

1个答案

筛选条件:
最有帮助的 最新 最老的
最有帮助的答案

更多选项

Blown U2 IC is culprit. need to have a micro solder technician replace the tristar!

这个答案有帮助吗？

是 否
得分 1

4条评论:

What can cause it to blow ? Isn't the U2 IC chip responsible for charging?

由完成的

It is responsible for the charging, data connection to the computer and providing information to the pmic chip. Using third party cheap cables will damage this chip.

You experience not charging, not turning on... very likely the U2 IC but could also be the a vcc main short somewhere or the PMIC chip blown. The only way to know is to have good use of multimeter and board schematics to pin point the problem. We do this daily and see vcc main shorts and u2 shorts all the time.

由完成的

Also another thing to note need to look under the metal shields for liquid damage on logic board IC components

由完成的

How does a cheap cable cause the chip to blow? Wouldn't it be the charger's fault rather than the cable?

由完成的

添加一条评论

添加你的答案

Richard Danh 将永远感激不已
浏览统计数据:

过去 24 小时： 1

过去 7 天： 2

过去 30 天： 2

总计 60