跳转到主内容

The third-generation Golf (Mk3) made its home-market début in August 1991 and again grew slightly in comparison with its immediate predecessor, while its wheelbase remained unchanged.

14 个问题 查看全部

My right brakelight is not working even after a bulb change

I bought this car a month ago and the guy I bought off said the right break light doesn't work and he also tried to change the bulb but no luck all other lights work. I have checked wires and they all seem normal

回答此问题 我也有这个问题

这是一个好问题吗?

得分 1

2条评论:

Is only one of the bulbs not working or do none of them work?

完成的

Just one I've switched the one bulb to the other to test it.....now there seems to be one less connector for the right side there's 3 to plug in on the left and only 2 on the right

完成的

添加一条评论

4个答案

Check and replace the fuses. There is often more than one fuse box, check your manual. On some cars there is a set of fuses under the hood and another inside the dashboard or under it somewhere.

这个答案有帮助吗?

得分 0

1条评论:

Yes but wouldn't that mean all the lights on the taillight would be out not just the left brake light

完成的

添加一条评论

Check the most obvious things first…

Bulb, guarantee that its a known good one..

Corrosion on the bulb socket

Corrosion on the light bulb support wire connector

Fuses

Check the ground connection

if all fails, you are looking at wiring problem…

这个答案有帮助吗?

得分 0
添加一条评论

One of the things that could cause this is using single filament bulbs were 2 filament bulbs are meant to be installed. to check this, remove the bulb and check the back of the bulb, count the connector pins. now check the socket and count the connector pins. these should be the same, if not you have the wrong bulb.

Might be worth checking this.

Installing wrong number of filament bulbs can cause al sort of strange behaviour, like when indicating the brake light starts flashing for example.

这个答案有帮助吗?

得分 0
添加一条评论

Try to translate this what I write. I can better tell you how to do it in German. Unter dem Lichtschalter für das Abblendlicht und Standlicht gibt es zwei Gründe Quadrate die man drücken muss. Danach gibt es eine offene Stellen zum raus ziehen. Dort findest du die Sicherungen. Auf der Abdeckung ist Nummeriert welcher Stecker für was ist. Es kann sein das eine Sicherung bei dir durchgebrannt ist. Das war bei mir der Fall.

这个答案有帮助吗?

得分 0
添加一条评论

添加你的答案

chris cantin 将永远感激不已
浏览统计数据:

过去 24 小时: 1

过去 7 天: 7

过去 30 天: 25

总计 4,245