Ipad 2 does not charge even do the charging dock has been replaced

Question

iPad 2 Wi-Fi EMC 2415

Second generation of Wi-Fi iPad, released on March 11, 2011. Model number A1395. Repair is difficult and will require heat.

250 个问题查看全部

Diana Vargas @dianavargas

声誉积分: 1

1

发帖于: 2018年6月29日

更多选项

Ipad 2 does not charge even do the charging dock has been replaced

I am trying to repair an Ipad 2. The original issue was that it was not charging because it falls down.

In the first review, the charging dock looks broken from the outside, so I proceed to replace it.

But now, with the new dock, the Ipad still not charging. (there are no signs of the charging icon and it does not turn it on when the charger is connected)

When I connect the charger, it seems not to do anything.

The LCD works, the Home button works, but there is a problem with the Power button.

It does not work when pressing it.

Some ideas or where shuold I review?

已回答！ 显示答案我也有这个问题

这是一个好问题吗？

是否

得分 0

添加一条评论

1个答案

已选择的解决方案

Minho @refectio

声誉积分: 221.5千

15

290

807

发帖于: 2018年6月30日

更多选项

It is possible that the replacement flex you installed is also defective; small parts tend to have higher failure rates. Otherwise, closely inspect the connector on the logic board.

Does it get recognized by iTunes when you connect it?

If it still won't charge but is recognized by iTunes, then it may be an issue with the actual charge circuit.

这个答案有帮助吗？

是否

得分 2

4条评论:

First of all, thanks for your answer.

Answering your questions, the iPad is not recognized by iTunes when connected.

But I also notice that if I left the iPad charging the charging icon does not appear, but the iPad charge in a very slow way. (I left it all the night and charge like 50% more)

Do you think that the flex replacement is defective? Or should I review something else?

Thank you very much

由 Diana Vargas 完成的 2018年7月6日

How are you charging the iPad? Via a computer, a small charging brick (like the iPhone) or the larger charging brick?

由 Minho 完成的 2018年7月6日

With the larger one.

由 Diana Vargas 完成的 2018年7月6日

Use a battery utility, such as coconutBattery (for Mac) or 3uTools (for Windows). It will tell you what the health of the battery is. Anything less than 70% of design capacity will require replacement.

由 Minho 完成的 2018年7月7日

添加一条评论

First of all, thanks for your answer.

Answering your questions, the iPad is not recognized by iTunes when connected.

But I also notice that if I left the iPad charging the charging icon does not appear, but the iPad charge in a very slow way. (I left it all the night and charge like 50% more)

Do you think that the flex replacement is defective? Or should I review something else?

Thank you very much — Diana Vargas
How are you charging the iPad? Via a computer, a small charging brick (like the iPhone) or the larger charging brick? — Minho
Use a battery utility, such as coconutBattery (for Mac) or 3uTools (for Windows). It will tell you what the health of the battery is. Anything less than 70% of design capacity will require replacement. — Minho

iPad 2 Wi-Fi EMC 2415

Ipad 2 does not charge even do the charging dock has been replaced

1个答案

添加你的答案