My mac started to give some flicker problems, until it became unusable. I opened the frame of the LCD and I noticed that by pressing the flat DX, the screen returns to work well.
The computer has not suffered any impact. Is it possible that it is overheated too much and there are problems with welding?
声誉积分: 449
6
1
Based off the video you posted, either the LVDS flex cable or the daughter board have suffered some kind of damage.
这个答案有帮助吗？
Hello,
No damage gives it.
The first disturbances were the keyboard malfunction (qwerty letters line).
Then I reset the SMC because I think the fan was not working properly.
In fact, the fan is located on that side.
I looked for a new LCD but have unrealistic prices. My screen, except for this problem, is in good condition.
If you aren't comfortable with attempting a repair yourself, I would recommend taking it to a local repair center that has experience with it.
过去 24 小时： 0
过去 7 天： 0
过去 30 天： 3
总计 82
