修复你的物品 社区 商店

Complete repair manual for the PSP Go, including battery upgrade and display repair instructions.

89 个问题 查看全部

更多选项

Broken trigger ribbon connection

Hi I broke the little plastic plug that the ribbon cable for one of my triggers like in these images that I found on an unanswered question. I didnt even realise I broke it compeletly when working on my PSP, they must be very brittle.

How it should look (the right trigger on my unit)

http://imgur.com/HNbN2pB

How my left trigger connector looks

http://imgur.com/v2N51R2

I've tried securing it down to the logic board with electrical tape, but to no avail. My repair skills are pretty basic, but I'm willing to learn - how can I go about fixing this?

Is there anyway to repair this or is my PSP GO dead due to a basic plastic part :(

回答此问题 我也有这个问题

这是一个好问题吗？

是 否
得分 0

2条评论:

Well I know for sure electrical tape won't work, it's barely even tape.

You need to secure it using the connector and it's locking mechanism, not tape or anything, I just hope u didn't lose the lock.

由完成的

Nah lost the lock a long time ago lol the whole this came off, seems to work with blue tack, used the same trick on my broken switch joy con

由完成的

添加一条评论

1个答案

筛选条件:
最有帮助的 最新 最老的

更多选项

I’ve repaired these numerous times but it all boils down to the condition of ribbon.

I have done it several ways. I’ll list them: You can scrape the ribbon to expose the metal . Then use trace repair on it. It’s made up of like silver paste with an adhesive mixed in.
I just looked it up . It’s called a silver pen

You can hard wire it. Get like 18 or 20 gauge wire and solder them.

I’ll leave it there and that should do it. The other methods are complex and too hard to explain.
Good-luck and hope this helps

这个答案有帮助吗？

是 否
得分 0
添加一条评论

添加你的答案

Luca Chana 将永远感激不已
浏览统计数据:

过去 24 小时： 1

过去 7 天： 3

过去 30 天： 26

总计 271