D55u-d1 Gets logo then powers off.

Question

Vizio Television

Repair guides and support for LED, LCD, HD and other Vizio TVs.

933 个问题查看全部

Dan Ritchie @dritchie84

声誉积分: 1

1

发帖于: 2018年3月23日

更多选项

D55u-d1 Gets logo then powers off.

So of course my Vizio TV is out of warranty. Recently I have an issue where the logo will display but after 10 seconds it powers off. Being out of warranty I replaced the main board myself to no avail. Before I waste more money solving this problem does anyone have any ideas as to what would cause this problem?

All the boards look good, I don't see any signs of blown capacitors, I'm just wondering what my next step should be, replace power board or replace t-con board.

Vizio tells me it can't be a firmware issue nor will they release the firmware to me.

Any ideas?

回答此问题我也有这个问题

这是一个好问题吗？

是否

得分 0

1条评论:

After talking to tech support from their third party company it sounds like a screen issue....if that's the case it's not cost effective to fix. Anyone else dealt with a power issue on screen itself?

由 Dan Ritchie 完成的 2018年4月4日

添加一条评论

3个答案

After talking to tech support from their third party company it sounds like a screen issue....if that's the case it's not cost effective to fix. Anyone else dealt with a power issue on screen itself? — Dan Ritchie

ssavva05 @ssavva05 声誉积分: 421 4 2 · Answer 1 · 2018-03-23T16:53:16-07:00

ssavva05 @ssavva05

声誉积分: 421

4

2

发帖于: 2018年3月23日

更多选项

If you change the logicboard , then check if there is any other board inside, then check for the backlight if it works.

这个答案有帮助吗？

是否

得分 0

3条评论:

Backlight works I can see it power on with the back panel open. There are 3 other boards, but I found a total repair kit for $70 that includes all the boards, so I just bought it. I'll regut the whole thing and that should solve any issues I'm having.

Thanks,

Dan

由 Dan Ritchie 完成的 2018年3月23日

Alright, if you change it all and not work there is no other way

由 ssavva05 完成的 2018年3月23日

lol that would be my luck!! Vizio support is no help.....they make it sound like only absolute trained professionals should replace these parts.....sorry Vizio your LED tv's are much easier to fix than the 5 DLP's i've brought back to life!

由 Dan Ritchie 完成的 2018年3月23日

添加一条评论

Dan Ritchie @dritchie84 声誉积分: 1 1 · Answer 2 · 2018-04-03T07:40:26-07:00

Dan Ritchie @dritchie84

声誉积分: 1

1

发帖于: 2018年4月3日

更多选项

Regutted entire TV, nothing solved the problem....i'm believing it's a firmware issue yet no one will release the firmware to me....anyone happen to know where I could get it?

这个答案有帮助吗？

是否

得分 0

1条评论:

Did you figure out the solution?

由 yup 完成的 2019年12月20日

添加一条评论

bjerkelarry @bjerkelarry 声誉积分: 1 · Answer 3 · 2021-02-14T08:34:52-07:00

bjerkelarry @bjerkelarry

声誉积分: 1

发帖于: 2021年2月14日

更多选项

You have a bad EEPROM in the main board, its what sends the start boot to the CPU, its a common failure, and a $10 part but a little tricky to replace unless you are real good at soldering, its only a 8 pin chip but very small, a replacement main board will also fix the issue but that board isn’t cheap

这个答案有帮助吗？

是否

得分 0

1条评论:

Do you know the part number?

由 Aaron 完成的 2023年11月14日

添加一条评论

Vizio Television

D55u-d1 Gets logo then powers off.

3个答案

添加你的答案