已解决： 1st attempt at charger port repair, do I need to send out to someone e - iPad Mini 3 Wi-Fi

1st attempt at charger port repair, do I need to send out to someone e

This is my first time doing board level repair and I'm not sure if I can attach the charger port on after I tinned the pads. Someone please help. Im attaching pictures for any help.

已回答！ 显示答案我也有这个问题

这是一个好问题吗？

是否

得分 0

1条评论

@refectio might have good advice here.

由 Aiden 完成的 2018年3月11日

发帖于: 2018年3月11日

更多选项

Several pads are partially missing. You'll need to check the continuity between those pads and their connection points to insure you have a complete connection. If everything checks out okay, then you can solder the flex. You'll need to use a lower temperature than normal when you solder a flex otherwise you can damage it.

这个答案有帮助吗？

是否

得分 1

3条评论:

Novice question, how do I check continuity...how do I find ground?

由 Yalena Talley 完成的 2018年3月11日

If you want to ground yourself, you can use the bottom hole on an outlet (NOT THE LINES) or a radiator. something metal basically.

由 Aiden 完成的 2018年3月11日

Unfortunately, there is no schematic available for the mini 3 in the wild. You can get the boardviews via ZXW (which is highly recommended if you are serious about micro-soldering). That will show you what is connected to what. To check continuity between pads, you don't need to find ground...you just want to see if the the two pads are connected together.

由 Minho 完成的 2018年3月11日

添加一条评论

iPad Mini 3 Wi-Fi

1st attempt at charger port repair, do I need to send out to someone e

1个答案

添加你的答案